Try the Installation Again Using a Valid Copy of the Installation Package sqlncli.msi
As we all know Windows Installer is used to install, uninstall programs in the system. Commonly, this package runs to completion well without whatever errors. Withal, at times the users accept reported seeing the post-obit mistake:
There is a problem with this Windows installer parcel
At times, the fault is seen along with 1720,1721,17213112 error numbers. This fault is noticed while installing popular apps similar iTunes, Adobe Acrobat Reader, Unreal Engine, Datasmith exporter for 3dmax, SQLite, etc.
Possible causes for this problem are :
- Inadequate permissions of the installation folder
- Unstable network admission
- Corrupted Installer file
- Malware or Virus infected organization
- Windows is non upwardly to appointment
In case you take encountered this result, at that place is nothing to worry nearly. In this article, nosotros will be discussing different ways to ready the mistake with the Windows Installer parcel.
Note: –
1.Try downloading and installing again subsequently disabling third party Antivirus software. It stock-still the result for most of the users.
2. Cheque the downloaded file size again. May be this error is being show due to incomplete download of the software parcel.
Set 1: Tweak the Registry Settings
NOTE: Yous must be logged in as an Administrator to practise this change.
Step 1: Open run window belongingsWindows+r keys
Step 2: Enterregedit and pressEnter
Step 3: If yous run into the UAC window popping upwards, click on the Yesbutton
NOTE: Registry editing can take an agin effect on the system even with the slightest mistake. Then please be very conscientious.Also, Information technology is advised to take the fill-in of the registry before proceeding. To have a backup, In the Registry Editor–> Go to File –> Export –> Save your Backup file.
Footstep four: In the top bar, re-create-paste the following location and hitEnterevery bit shown below
HKEY_CLASSES_ROOT\Msi.Package\shell
Step 5: Right-click on the beatkey. Choose New and then select Primal
Step 6: Proper name this newly created key as runas and hitting Enter
Stride seven: Click on runas and then double click on the (Default) key on the right-hand side
Pace eight: In the Edit String window, under the Value data, enter the below text and hit Enter
Install every bit &administrator
Footstep nine: Right-click on the runas key that we created. Choose New–> Primal.
Step 10: Name the newly created primal as command and striking Enter
Stride 11: Click on the command key. On the right-hand side, double click on (Default) key
Footstep 12: In the Edit Cord window, under the Value data, enter the beneath text and hit Enter
msiexec /i "%ane"
Step 13: Restart the Arrangement
Stride xiv: Now try installing the awarding once again.
Fix 2 – Change Temp binder permissions
1. Open file explorer.
2. Go to the accost given below
C:\Users\%username%\AppData\Local\
3. Now, Right click on Temp folder and choose properties
three. At present, click Security Tab
iv. Click on Edit
5.Click on Add.
6. Write Everyone in the text field.
7. At present, click on cheque names.
eight. An underline will appear beneath everyone. At present, click OK.
nine. Now, select all permissions, including full control etc. for anybody.
ten. Click on OK and Apply.
Now, endeavour once again.
In case this doesn't help check the full general fixes listed below.
Set 3: Run as an administrator
In example you exercise non have the Administrator rights, so contact your administrator
Step 1: Locate the Installer file in the system and correct-click on it
Step 2: From the context menu, select Run every bit administrator
For some applications, you can see that Run equally administrator doesn't show up in the context carte du jour. For such applications, follow the below steps
Step 1: Concord theWin Key and then press R
Step 2: Typecmd and hit Ctrl+Shift+Enter
This opens the control prompt in Admin fashion
Footstep 3: In the User Access Control window, only click on Yes.
Cheque if this helps, if not endeavor the next set up.
Set up 4: Apply Microsoft Programme Install and Uninstall
Step 1: Download theMicrosoft Plan Install and Uninstall from this link
Step 2: Click on the Download troubleshooter push button on the folio
Footstep 3: Right-click on the downloaded troubleshooter and click on Open up
Step four: Select Adjacent and then cull Installing
Stride five: From the given list of options, select the application you desire to install. In case the required awarding is not listed, and so select Non listed.In this case, you have manually scan to the location of the installer file
Stride 6: The troubleshooter volition start running wait for some fourth dimension for it to identify the problems
Step 7: Once the issues are identified, follow the instructions on the screen to ready them
Check if this helps, if not try the adjacent ready listed
Set 5: Restart the Windows Installer service
Footstep one: Open Run Dialog (Windows+r)
Pace two: Typeservices.mscand hitOK
Footstep three: In the Services window, ringlet downwards to find the Windows Installer service
Stride 4: Correct-click on the service and select stop equally shown below
Step v: Once more, right-click on the Windows Installer service and cull Start
Step 6: Restart your system and try again.
If this does non prepare the error, try the side by side ane
Fix half-dozen: Repair the Application
Note that not all applications will accept this pick. Merely as an example, iTunes has the pick to repair. However, if yous check Adobe Acrobat Reader, it doesn't.
For demonstrating, nosotros are using iTunes App i.eastward Apple tree Mobile Device Support. Withal, the steps should be similar for any other application
Footstep 1: Open up the Run dialog with Windows+R shortcut
Pace ii: Blazon the commandms-settings:apps and printing OK
Step 3: In the Settings window that appears, scroll down on the correct-hand side to locate the required application. For example, Apple tree Mobile Device Back up. Click on the Modify button
Stride 4: In the App Support window that opens, Tick on Repair and and so printing on the Next push button
Pace 5: This would accept some time and the application would be repaired.
Step 6: Now try installing once again and cheque if the fault exists.
If you are still noticing the error while installing, try the next fix.
Ready 7: Re-annals Windows Installer
Footstep ane: Open Run Dialog holding Win Key+R combination
Pace 2: Enter cmd and striking Ctrl+Shift+Enter to open a Command prompt with Admin privileges.
Step three: In the UAC window that opens asking for permissions, click on Yes
Stride 4: In the command prompt window that opens, type the below control and hit Enter
MSIExec
Step 5: When everything is working every bit expected you will see the Details window equally shown below. If not, an fault report will be displayed.
Footstep half-dozen: If the mistake study is displayed, 1 should consider re-registering the Windows Installer.
Stride 7: In the command prompt type the below commands one after the other. Make sure to press Enter key later on every command
msiexec.exe /unregister msiexec.exe /regserver
These commands will re-annals the Windows Installer in the system. Now try installing the application once more and check if everything is working every bit expected.
Fix 8: Disable the apps at Startup and try Installing
Step 1: Open the Run window(Windows+r)
Pace 2: Type msconfigand pressOK
Pace 3: In the Organization Configuration window that opens, under the Services tab, Tick theHide All Microsoft services
Step 4: Click on the Disable allbutton
Step five: In the same window, Open the Startup tab, click on Open Task Director
Step 6: In the Task Managing director Window that opens, Disable all the programs that are enabled at the showtime-up.
Footstep vii: In the System Configuration Window, Click on Apply and then PressOK
Pace viii: Restartthe PC.
Step 9: At present that there will exist no interference from any other application, attempt installing. If it does not help, checkout the fixes listed in the next section
Prepare 10: Installing Latest Updates
Footstep 1: Open the Run window(Windows+r) and typems-settings:windowsupdate-actionand pressOK
Step 2: In the Settings –> Update & Security –>Windows Update window that opens, click on Check for Updates. Once the updates are installed, restart the PC.
Now that the organisation is up to date, bank check if the result still exists.
Fix xi: Scan the organisation for Malware or Virus
Sometimes, the viruses and malware in the system can affect the working of the Windows Installer.
Stride one: Hold the keysWindows+rand open the Run Window
Footstep 2: Blazonms-settings:windowsdefender and pressOK
Step 3: In the settings window, chooseVirus & Threat Protection
Footstep four: In the window that opens, click onScan Options
Stride 5: ChooseFull scan and press onBrowse at present push
In one case the scan finishes, it notifies virtually any viruses and malware in the system. Take necessary steps to mitigate them.
In case you are still seeing the same fault, so try the next fix.
Prepare 12: Run Plan Compatibility Troubleshooter
Step 1: Locate the application file(.exe file) in the system
Step two: Right-click on the Awarding file(.exe) and ChooseTroubleshoot Compatibility
Footstep six: In the Program Troubleshoot Compatibility window, click onTry recommended settings.
Step 7: In the window, the problems are detected and stock-still.
At present attempt Installing over again and see if this fixes the issue.
That'south All.
We promise this has been informative. Kindly annotate and permit us know in case you run into issues. We will exist glad to assist.
Besides, delight comment and let us know if you were able to set the issue with the above fixes.
Thank you for Reading.
Anusha Pai is a Software Engineer having a long experience in Information technology industry and having a passion to write.
Source: https://thegeekpage.com/there-is-a-problem-with-this-windows-installer-package/
0 Response to "Try the Installation Again Using a Valid Copy of the Installation Package sqlncli.msi"
Enregistrer un commentaire